Convex Side menu
Convex Side menu
Convex Conforms To Curves

Convex® GearWrap™

GearWrap Sticks to Helmets,
& Electronics.• Vinyl that conforms to complex curves
• GearWrap Adhesive sticks to plastics/metals

Convex GearWrap’s adhesive is designed for high-energy surfaces such as helmets and is cleanly removable for up to one year, which makes refurbishing easier.

The adhesive is a high-performance clear (initially repositionable) permanent pressure sensitive adhesive that is ideal for enamel painted surfaces, glass, stainless steel, aluminum, copper, vinyl and ABS plastics.

Most Conformable

 

 Tough

 

 Thickest
Convex and Convex Laminate Convex and Convex Laminate Convex and Convex Laminate
4 mil Convex GearWrap with
4 mil Convex Laminate
USE FOR:
Mini-helmets, Electronics, and Gear
4 mil Convex GearWrap with
8 mil Convex Laminate
USE FOR:
Higher Durability but Conformable
8 mil Convex GearWrap with
8 mil Convex Laminate
USE FOR:
18 mil, most durable for Helmets


 
Specs Solvent Inkjets Thermal Printers Laminates
 
Inkjet ready Convex

Thermal Printers

Friday, 03-Sep-2010 06:31:07 GMT
Convex GearWrap 4 mil Clear vinyl, 15 in x 10 yd SKU:  C41510C|Price:  $47.00 |
Convex GearWrap 4 mil Clear vinyl, 15 in x 50 yd SKU:  C41550C|Price:  $188.00 |
Convex GearWrap 4 mil White vinyl, 15 in x 10 yd SKU:  C41510W|Price:  $47.00 |
Convex GearWrap 4 mil White vinyl, 15 in x 50 yd SKU:  C41550W|Price:  $188.00 |
Convex GearWrap 8 mil Clear vinyl, 15 in x 10 yd SKU:  C81510C|Price:  $61.25 |
Convex GearWrap 8 mil Clear vinyl, 15 in x 50 yd SKU:  C81550C|Price:  $245.00 |
Convex GearWrap 8 mil White vinyl, 15 in x 50 yd SKU:  C81550W|Price:  $245.00 |
Custom sizes available
Software Settings: In Gerber’s Plot program, click on the “123” button then click on the substitute button and select vinyl type “Convex GearWrap” from the pull-down menu. The default plotter settings for "Convex GearWrap” will work for the 4-mil Convex™.

8-mil Convex® use the same print settings. If you have a Gerber enVision 375 plotter, you can use a 45º blade to cut. A 60º blade is recommended for combinations resulting in a finished thickness over 8 mil. In Gerber’s Plot program, go to plotter settings “F7” and set the Speed to 50, Acceleration to 66, Force to 25 or more depending on the age of your blade, and Sharp Corners to 80. You may choose to double cut the shapes also by selecting 'double cuts."

12 mil. (4+8 or 8+4) – S-33, AC-66, F- 40+, SC-80.
16 mil. (8+8) – S-33, AC-66, F- 50+, SC-80.
If you do not have enVision series Gerber cutter, you will have to determine the settings by testing the material. If you are using Mac Imprint™ or another program, please test your cutter settings.
USE A 60º BLADE on any combination of material 8 mil or thicker.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.

DEI/GMS0904 GRAPHIC MARKING SYSTEMS