Convex Side menu
Convex Side menu
Convex High-Bond for Motocross decals and stickers
Convex® High-Bond Sticks! It sticks to plastics. It sticks to powder-coated paint. And it stays stuck.

• Vinyl that conforms to complex curves
• High-Bond Adhesive sticks to plastics/powder paint
• Made for Motocross, ATV and Kart plastics

The Pros use Convex High-Bond because they know they can
depend on it, every time.

Convex sticks to to bike, ATV, sled and kart plastics. With Convex High-Bond you know that your work will stay on your plastic... and not end up in the dirt.

Toughest

 

 Tough, Conformable

 

 Most Conformable
Convex and Pro Shield Convex and Pro Shield Convex and Convex Laminate
6 mil Convex High-Bond with
12 mil Pro-Shield
USE FOR:
MX Bikes, ATVs
6 mil Convex High-Bond with
7 mil Pro-Shield
USE FOR:
Complex Curves &
MX Bike Numberplates
6 mil Convex High-Bond with
8 mil Convex Laminate
USE FOR:
Complex Curves, ATVs Rhinos


 
Specs Solvent Inkjets Thermal Printers Laminates
 
Inkjet ready Convex

Thermal Printers

Friday, 03-Sep-2010 06:31:29 GMT
Convex 6 mil High-Bond White vinyl 15 in x 10 yd SKU:  CHB61510W|Price:  $51.00 |
Convex 6 mil High-Bond White vinyl 15 in x 50 yd SKU:  CHB61550W|Price:  $204.00 |
Convex 6 mil High-Bond Clear vinyl, 15 in x 10 yd SKU:  CHB61510C|Price:  $51.00 |
Convex 6 mil High-Bond Clear vinyl 15 in x 50 yd SKU:  CHB61550C|Price:  $204.00 |
Convex 6 mil High-Bond Matte White 15 in x 50 yd (Punched) SKU:  CHBM61550W|Price:  $194.00 |

Custom sizes available
GSP Software Settings: In Gerber’s Plot program, click on the “123” button then on the substitute button and select vinyl.
Select “Convex High-Bond" or "Convex High-Bond” from the pull-down menu as the vinyl to print on. 

The default cutter settings for “Convex High-Bond” will work for the 6 mil. Convex.  For 10 mil. (6+4 mil. laminate), if you have a Gerber enVision 375 cutter, in Gerber’s Plot program, go to cutter settings “F7” and set the Speed to 33, Acceleration to 66, Force to 25 or more depending on the age of your blade, and Sharp Corners to 80.

For 14 mil. (6+8 mil. laminate) – S-33, AC-66, F- 40+, SC-80.
For Pro-Shield laminates, use double cuts.
If you do not have enVision series Gerber cutter, you will have to determine the settings by testing the material.  If you are using Mac Imprint™, please test your cutter settings.



USE A 60º BLADE on any combination of material 8 mil or thicker.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.

DEI/GMS0904 GRAPHIC MARKING SYSTEMS