Locate Id: 1925

Gerber PermaGrip

Gerber PermaGrip

5+ Year Vinyl with Opaque adhesive for most surfaces

Gerber PermaGrip is a durable, permanent cast vinyl film that has been custom formulated for use with Gerber Digital Color Printing Systems and GerberColor® foils. It is dimensionally stable and has an extremely aggressive pigmented adhesive system that provides superior hiding power when applied over colored surfaces. Gerber PermaGrip is edge-stripped to eliminate buildup of adhesive residue on sprocketed equipment.

Custom formulated for use with GERBER EDGE Printing Systems and GerberColor foils.

Intended Applications: Gerber PermaGrip is ideally suited for a wide variety of commercial, industrial and safety applications. It can be used to create interior and exterior labels, emblems, logos and signs on many surfaces including, flat, moderately compound curved and moderately-rough surfaces and some low surface energy materials. The user should determine the suitability of all substrates prior to actual application. This film is not recommended for use on corrugated, riveted or highly irregular surfaces. It is not recommended for flexible signface or flexible banner material. It is also not intended for applications where petrochemical contact may occur. If petrochemical exposure is anticipated, refer to the section below on protecting graphics.

PHYSICAL PROPERTIES:

Film Color: White

Adhesive Type: Gray, Pressure Sensitive

Liner: 78 Pound White Paper

Application Surfaces: Flat or moderate compound curves, with and without rivets

Minimum Application Temperature: 40°F (4°C)

Thickness (Film + Adhesive): 0.003-0.004 in.

Tensile Strength: 5 lbs/in. at 73°F

Applied Shrinkage: .047 in.

Service Temperature Range: -65° to 225°F


 
  1. Gerber Permagrip White 15 in x 10 yd

    AP75517-10Y

    Regular Price: $76.28

    Special Price: $66.36

  2. Gerber Permagrip White 15 in x 50 yd

    AP75517-50Y

    Regular Price: $314.07

    Special Price: $273.24