MotoWrap Laminate
MotoWrap™ Laminate
Thick pliable vinyl for vehicles & powersports
Easily apply decals and wraps to MX bikes, snowmobiles, and other powersports vehicles. If your decals need to last longer than 1 or 2 races, laminate the decals with MotoWrap™ to shield from abrasion from rubbing and grit. Keeps the bike graphics shining through ride after ride!
Use MotoWrap Laminate to protect graphics on bikes, ATVs and power sport vehicles. MotoWrap 8 mil Laminate is easier for the average person to apply, because it can conform over curves of plastics and metals.
Printer Type |
Widths (inches) |
Lengths (yards) |
Thicknesses |
Colors |
Gerber |
13 |
5, 10, 50 |
8 mil |
Clear |
Wide Format |
20 |
10, 50 |
8 mil |
Clear |
Wide Format |
30 |
5, 10, 50 |
8 mil |
Clear |
Wide Format |
54 |
50 |
8 mil |
Clear |
Wide Format |
60 |
50 |
8 mil |
Clear |
PHYSICAL PROPERTIES:
Thickness: 8 mil vinyl with 1 mil of adhesive
Adhesive Properties: General purpose permanent acrylic pressure sensitive adhesive works on most surfaces. Not recommended for low energy plastics.
Outdoor Life: 2 years
Shelf Life: 2 years stored at 70 F & 50%RH
Service Temperature Range: -40˚ F to 176˚ F
Minimum Application Temp.: 50˚ F
This product is CALIFORNIA PROPOSITION 65 Compliant. See spec sheet below: