PlaStick

Locate Id: 2007

   
PlaStick™

Vinyl that sticks to plastic permanently

This is the most aggressive media when it comes to smooth plastic surfaces. It even works on Thermoplastic Olefin (plastic with wax in it). PlaStick is a soft, flexible, 3 mil white vinyl that is formulated for thermal and inkjet printing. PlaStick has 1.4 mils of the most aggressive permanent PSA for low energy (LSE) surfaces, including powdered paint. It is ideal for smooth applications such as molded plastic parts. When applying to new plastic surfaces, be sure to clean the silicone off them first with alcohol or acetone. PlaStick is not recommended if removal will be necessary. For textured surfaces use Pitbull, which has 2 mils of the same adhesive, to reach into the recessed areas of textures.

Printer Type

Widths (inches)

Lengths (yards)

Thicknesses

Colors

Gerber

15

5, 10, 50

4 mil

White

Gerber

15

50

4 mil

Safety Orange, Safety Yellow

Wide Format

30

5, 10, 50

4 mil

White

Wide Format

54

25, 50

4 mil

White

Wide Format

60

50

4 mil

White

PHYSICAL PROPERTIES:

Thickness: 3 mil vinyl with 1.4 mil of adhesive
Outdoor Life:
2 years
Shelf Life:
2 years stored at 70 F & 50%RH
Service Temperature Range:
(-40º F to 176º F)
Minimum Application Temp.:
50º F
Adhesive Properties:
1.4 mils of permanent acrylic pressure sensitive adhesive works for most surfaces including textured low energy plastic and metal surfaces.

 


This product is CALIFORNIA PROPOSITION 65 Compliant. See spec sheets below: