Gerber Glow

GerberGlow for Novelty Graphics

Glow-in-the-dark film needs very little daylight to charge and glows for 30 minutes

GerberGlow is a 2.5 mil "glow-in-the-dark" vinyl designed for use with Gerber Digital Color Printing Systems and GerberColor™ foils. GerberGlow will produce the brightest glow for 30 minutes following full activation (requires at least one hour of exposure to fluorescent, incandescent, black light, direct or indirect sunlight). Exposure to less than one hour of light (minimum 10 minutes) will provide varying degrees of luminance.

Recommended for interior applications only. This film can be used for novelty and decorative items, or way-finding arrows or stripes. See Glo Brite or 3M Luminous film for for a longer glow life and outdoor durablity.

Intended Applications: GerberGlow is ideally suited for the production of interior identification signs/symbols, and novelty items. GerberGlow is recommended for interior use only, on flat or simple curved surfaces. It is not intended for applications where petrochemical contact may occur. If petrochemical exposure is anticipated, refer to the section below on protecting graphics. The user should determine the suitability of all substrates prior to actual application.

 

PHYSICAL PROPERTIES:

Thickness: 2.5 mil

Film Color: Matte light yellow-green

Adhesive: PSA

Adhesive Color: White pigment

Liner: Double-sided, polycoated

Dimensional Stability: .5%

Application Temperature: 50°F (10°C)

Operating Temperature: -40°F to 176°F (-40°C to 80°C)

 

 
  1. Gerber Glow - 15 in x 50 yd

    P68500A
    $791.21
  2. Gerber Glow - 15 in x 10 yd

    P68499A
    $168.05