You have no items in your shopping cart.
Removable vinyl with Opaque adhesive
Gerber InstaChange is a durable, removable, scratch-resistant vinyl custom formulated for use with Gerber Digital Color Printing Systems and GerberColor foils. For up to two years after application, the film's unique adhesive allows the graphic to be removed from most surfaces without leaving an adhesive residue and without the aid of chemicals, accessories, or heat. Gerber Instachange is white with an opaque gray pigmented adhesive system that allows you to cover pre-existing graphics with maximum opacity.
Ideally suited for vehicle graphics, fleet advertising, short term applications and promotional graphics.
Intended Applications: Interior and exterior emblems, logos, signs, point of purchase, and vehicular applications. This film has superior hiding power because of its gray pigmented adhesive. It is designed for application to flat surfaces with and without rivets. The user should determine the suitability of all substrates prior to actual application. This film is not recommended for use on corrugated or highly irregular surfaces. It is not recommended for flexible signface or flexible banner either. It is also not intended for applications where petrochemical contact may occur (It can be used in non-spill areas such as doors on cars and trucks). If petrochemical exposure is anticipated, refer to the section below on protecting graphics. Application of Gerber InstaChange to stainless steel substrates or over Gerber Reflective Sheeting is not recommended.
Thickness: 5 mil with adhesive
Film Color: White
Adhesive Color: Pigmented Gray
Liner: # 78 White Kraft
Tensile Strength: 13.5 lb/in/min (2.43 kg/cm/min)
Dimensional Stability: .015 (.38mm)
Application Temp: 28°F to 110°F (-2°C to 43°C)
Removable Temp: 28°F to 110°F (-2°C to 43°C)
Operating Temperature: -40°F to 150°F (-40°C to +66°C)
Gerber InstaChange - 15 in x 10 ydP63030A$62.28Gerber InstaChange - 15 in x 50 ydP63031A$267.63