Hardware & Software

18” Rotatrim Rotary Professional Trimmer

18” Rotatrim Professional Trimmer Maintenance Kit

20" Cold Laminator. TWO-Year warranty. Includes stand with locking casters, and foot pedal.

30" Cold Laminator. TWO-Year warranty. Includes stand with locking casters, and foot pedal.

5 Port Ethernet Hub

50 ft, PC to Plotter Cable for GS, HS Plotters

63" Top Heat, pressure sensitive laminator w/swing-out shafts. Includes Stand, Rotary Slitter and Rewind.

99% Isopropyl alcohol Techspray cleaning wipes - 50PK

A pair of GMS Heavy Duty Rewinders (HDR-2), plus the Alignment Frame. The Frame cradles and secures the Edge 1 or 2 and aligns the rewinders with the sprockets. Some assembly required.

A pair of GMS Heavy Duty Rewinders (HDR-2), plus the Alignment Frame. The Frame cradles and secures the Edge FX and aligns the 2 rewinders with the printer. Some assembly is required.

Accessory Tool Kit for the GS/15, HS/15

Allen Datagraph - 45 Degrees blade for materials up to 10 mils thick

Allen Datagraph - 60 Degrees blade for thick materials

Allen Datagraph - Carbide tip 30 Degrees blade

Allen Screw for Gerber Tangential knife holders, HS and GS plotters

BAIL 15" for the EnVision 375 / 750 (Blank-no wheels, pins, E clips, or set screw included)

Bail Arm Assembly Kit for all Gerber Printers

Bail Arm Spring, for the Edge II / LE

Bail arm Squeegees for Edge FX, Edge I or II -- 2 pack

Bail Arm Wheels for HS15+,GS+,HS,GS Plotters

Bail assembly 15 for the Envision 375 Plotter

Bail Knob, for all Edge printers

Bail Latch Bushing, for all Edge printers

Bail Latch Spring, for the EDGE FX, 2, LE

Bail Latch, for all Edge printers

Bail wheel axle (Pin) for HS15+,GS+,HS,GS Plotters

Bail Wheels for enVision 375 15" and 750 30"

Bailarm wheel and axle kit includes two wheels and one axle. This kit is for all GS and HS plotters HS15+, HS15, GSx, GS15.

Base Pan assembly for the EnVision 375 plotter

Bearing Ball for the Edge FX

Bearing Sleeve, 3/16" x 1/4" x 3/8" Plastic for the Edge FX

Box and packing for EnVision 375

Box for Edge FX with Skid and Straps

Box for GS Plotters

Box for the Edge II and Edge LE

Cable, 10 ft, 9 pin F to 25 pin M, Serial PC to Plotter GS, HS

Caddy for the Edge FX - one size fits all foils

Caddy Value Pack for the Edge FX (18 PK) - one size fits all foils

Calibration Weight Tool for Envision 375/750 Plotters

Cam Pad for GS15-GSx-HS plotters

Cassette Push Pin Assembly for Edge FX

Clamp SFT 312X812X250, for GS750-Plus Plotter

Control Board for the enVision 375 and enVision 750.

Cover Stop for the Envision 375 Plotter

CPU Board for Edge FX

Cutting Strip for the Envision 375 Plotter 15".

Driver Board for the EnVision 375

Drum and Sprocket Assembly for all HS & GS 15+ Plotter

Drum and Sprocket Assembly for GS 750+ Plotter

E- Clip to hold on Bail Wheels for enVision 375 15" and 750 30"

Edge FX Ethernet Patch Cable 15ft.

Edge FX Foil Motor 25RPM

EDGE FX TUNE-UP KIT includes: vinyl & foil squeegees, foil static brush, take up clutch, & more

Edge I & II - Z Opto Sensor

EDGE I, Foil Motor

EDGE II CPU Board

Edge Static Film Brush for the EDGE FX, 2, LE

Envision 375 - Bottom Right Cover for the Envision 375 Plotter

EnVision 375 - Left Plastic Cover - dk gray

EnVision 375 - Top Right Cover, for Control Panel (Dk Gray)

Envision 375 Cable, 10 ft, PC to Plotter

ENVISION 375 TUNE-UP KIT includes: enVision x axis cutting mat, bail assembly.

Envision Bailarm set screw for the EnVision 375 / 750

EnVision Cable Support Bracket, EnVision 375 / 750

Envision Carriage Interface Board

Fan/Motor HS15+, Plotters

Felt Tip Black Pen for EnVision 375 and 750 - Set of 5

Foil Squeegee for the Edge FX

Foil Squeegee for the Edge II / LE (except Classic TR..)

Front Pressure foot holds down material, for all Edge printers, includes 1 pressure foot screw

FX Caps for Edge II foils to fit the Edge FX. 4-Pack includes supply and take up adapters.

G4 IDLER PULLEY BRACKET ASSY for GS15/GSx plotters

Gas Strut for the Edge FX (ea.)

Gerber - 30 Degrees GS/HS plus plotters - tangential blade

Gerber - 45 Degrees GS/HS plus plotters - tangential blade

Gerber - 60 Degrees GS/HS plus plotters - tangential blade

Gerber - GS/HS15+ - Swivel Knife Blade 45 Degrees

Gerber - GSx plus - Swivel Knife Blade

Gerber - Knife Assembly, with Shoe and 2 Swivel knives, for GSx+, GS15+, & HS+, plotters

Gerber Envision Plotter - ENV 375/ 750 - Swivel Knife Blade 30 Degrees (2-pack)

Gerber Envision Plotter - ENV 375/ 750 - Swivel Knife Blade 45 Degrees (2-pack).

Gerber Envision Plotter - ENV 375/ 750 - Swivel Knife Blade 45 Degrees (2-pack). On Sale - 2 pk

Gerber Envision Plotter - ENV 375/ 750 - Swivel Knife Blade 60 Degrees (2-pack).

Gerber Envision Plotter - ENV 375/ 750 Swivel Knife Tool Holder w/45 Degrees Blade.

Gerber GSx plus 15 in Plotter with 1 year service contract.

GMS FastFinish Stripper/Rewinder

GMS FastFinish Stripper/Rewinder with EU power

GMS Heavy Duty Rewinder Station for the Gerber EnVision 375 Plotter - Plot Station

Graphtec - 0.9 mm Supersteel 60 degree Blades for most vinyls - 2-pack

Graphtec - 1.5 mm 45 Degrees Supersteel Blades for heavy materials - 2-pack

Graphtec - 1.5mm blade holder

Graphtec - 2-pack, 0.9 mm 45 degrees Supersteel Blades

Graphtec - 5-pack, 0.9 mm 45 degrees Supersteel Blades

Graphtec - blade holder - 0.9mm - Blue top, Brass tip

Grey Metal Cover, Upper Back for the FX (New Dark Grey)

Ground Strap for the Edge, Braided silver for all Edge printers

GS15 Plus and GSX Fuse 3.15A 250V 5x20mm

GS15+ Plotter - Timing Belt 100P 167T

GS15/ GSX TUNE-UP KIT - Includes: Paper Bail Wheels, Bail Axle, Roller Assembly and Lift Washer

Guide Tube Assembly for the EnVision 375 plotter

In-Depth Remote Training via the web (2 hrs).

Keypad and display for FX.

Keypad and Display for the EnVision 375 / 750

Keypad for Gerber GS15+, HS15+ & GS750+ Plotters

Left Dancer Bar for the Edge II / LE

Lower bail arm spring for the EnVision 375 / 750

Lower Chassis Cable. Vinyl and homing sensors for the FX

Lubriplate DS-ES Lubricant - 1.75 oz tube

Magnetic Squeegee Red 4" X 3"

Magnetic Squeegee Red 4" X 3" - 5 Pack

MANUFACTURER: Edge FX PCS + enVision 375 plotter + Omega + Frame/Rewinders + Plotter Stand/Rewinders

Mid bail arm spring for the EnVision 375 / 750

Motor and Pinion Assembly (x-axis) for the EnVision 375 / 750

New Carriage Assembly for the EnVision 375 / 750

OMEGA 1.5 - 5.0 to OMEGA 8.0 CP Upgrade with (NEW) S/N & Key and Find My Font Serial number and System ID required.

OMEGA 1.5 - 5.0 to OMEGA 8.0 Cut only upgrade with (NEW) S/N & Key and Find My Font Serial number and System ID required.

OMEGA 6.0 - 6.5 to OMEGA 8.0 CP/CS or LS Upgrade with Find My Font (Password and DVD Kit) Serial number and System ID required.

OMEGA 7.0 to OMEGA 8.0 CP/CS or LS Upgrade with Find My Font (Password and DVD Kit) Serial number and System ID required.

OMEGA 8.0 CP, Software with FIND MY FONT. Full installation seat.

OMEGA 8.0 CS MIP, Software with FIND MY FONT. Multiple Installation Program. Serial number and System ID required.

OMEGA 8.0 CS, Software (Cut Solution ONLY) with FIND MY FONT.

OMEGA 8.0 Layout Station with Find My Font (Design only) Special Offer: $295 with an Omega Upgrade

OMEGA 8.0 PS (Plot Station) Software Kit

OPTO SENSOR - X HOME ASSY 15 for the Envision 375 Plotter

Pan head cover screw for enVison 375

Paper Bail & Wheel Assembly for GS, HS 15" Plotters.

Photointerrupter for the Gerber Edge FX

Pins for Plotter Bail Wheels for enVision 375 15", 750 30", and GS750 plotters

Power Switch for EnVision 375 / 750

Pressure Foot Screw for the Edge FX, Edge2 / LE

Print head Data Cable for the Edge FX

Printhead Cleaning Pads for the Gerber EDGE 25 pk.

Rear Pressure foot, holds down material for all Edge printers includes 1 pressure foot screw

Registration Eyepiece for the HS15 and GS15 Plotters "Bomb Site"

Registration Eyepiece, for the Envision 375 Plotter

Rewinder Alignment Frame for the FX with 2 GMS Heavy Duty Rewinders with Euro 230V power supplies.

RFID Reader / Writer for the Edge FX

ROLLER ASSEMBLY, MOLDED for GS15-GSx-HS plotters

Rubber Foot .75" X .4" for the Edge FX

Rubber Foot for the EnVision 375 (held on with screw P38351A)

Rubber O-RING for the Edge II / LE

Screw for cover stop bumper for the EnVision 375 / 750

Serial Port PCB-367 to Rear Panel for GSx and GS15+

Smoked Grey Cover for Envision 375 15" Plotter

Smoked Grey Cover for Envision 750 30" Plotter

Spring Clip For Edge I & II

Supply Clutch .25 ID 20 oz IN CW for the FX

Take up Clutch .25 ID 60 oz IN CCW for the FX

Tangential Knife Holder with 30 degree blade for HS+, GS+, GS and HS plotters

Technical Support via the web (per hr).

Theta Belt for G4/SP/GS

Theta Clamp, for GS15-Plus Plotter

Theta Knife Lift Washers for GS, GSx, HS and all Gerber tangential knife holders

Threaded Rod for Envision 375 Carriage

Thumb Screw for Envision 375 Plotter

Timing Belt - Y Axis for the Envision 375 Plotter

TOOL FORCE HOUSING for HS15, GS15+, GSx

Top Driver Board Edge LE & Edge 2

Top Front Black Cover for Edge FX

Upper bail arm spring for the EnVision 375 / 750

Upper Chassis Cable for Edge FX

USB to Parallel Conversion Cable for Edge I & Edge II. 1.8 Meters (6 Ft), Works with Win10, Win11

USB to Serial Conversion Cable for the Envision Sprocket Plotter. Works with Win10 and Win11.

Vinyl Brush for all Edge printers

Vinyl Brushes for all Edge printers - 2 pack

Vinyl sensor for the Edge II / LE

Wing, Infeed, Right for the Edge FX

Wing, Outfeed, Left for the Edge FX

Wiring Harness Control for enVision 375 and 750

X Axis Stepper Motor Edge FX

X-Axis Drive Pully for GS 750 Plus Plotters

Y Axis Gear and Bracket HS15

Z Axis Lead Screw Nut for the Edge FX

Z Axis Motor and lead Screw Assembly Edge FX

Z Axis Motor for the Edge II / LE

EnVision 375 15 in Plotter 1 year service contract

EDGE-FX, 15 in Thermal Printer with 1 year service contract. Includes GMS Heavy Duty Rewinders (HDR-2) plus Alignment Frame with 3 year warranty.

OMEGA 8.0 CP MIP, Software with FIND MY FONT. Multiple Installation Program. Serial number and System ID required.